Hiệu chuẩn Oil Mist Detector - Schaller / Visatron

24/03/2025 09:58 PM 16 Lượt xem

A. Kit – Maintenance (Spare Part kit 1)

Item	P/N	Description	Quantity
1	365206	Filter for Pressure Reducer	1
2	365197	Disc Sinterbrass 22x2, Filter	2
3	366717	Filter cartridge (Optional)	1
4	365208	O-Ring-ISO3601-1-A-9,0x4,5-N	1
5	365198	Lock ring DIN 472 - 22 x 1 - S	2
6	355636	Gasket for Inspection cover for air scav	1

B. Kit – Service VN215 (Spare Part kit 5)

Item	P/N	Description	Quantity
1	330721	Gasket for valve box	1
2	330482	Gasket for Measuring Head	1
3	355636	Gasket for Inspection cover for air scav	1
4	200211	Measuring head suspension, top	2
5	200212	Measuring head suspension, bottom	2
6	365206	Filter for Pressure Reducer	1
7	365197	Disc Sinterbrass 22x2, Filter	2
8	365198	Lock ring DIN 472 - 22 x 1 - S	2
9	365193	Flexible bellow Base Plate/Meas. Head	2
10	480824	Sunk.screw ISO 10642 - M3 x 12 - 8.8 gv	4
11	366717	Filter cartridge (Optional)	1
12	365208	O-RING 9,0X4,5 NBR70 Screw Pressure Reducer	1
13	365449	O-RING 8,0X2,5 Screw Throttle	1
14	365954	O-RING 4,0 X 1,75 NBR70 Throttle	1
15	330543	Seal for airflow- pump	3
16	360132	Oil Return Gasket VN116/215	1
17	360133	Oil mist Gasket Valvebox VN116/215	1
18	360079	Rubber plate for tube connection	2
19	360194	Lock plug	5

C. Kit – Cleaning (Spare Part kit 2)

Item	P/N	Description	Quantity
1	270090 (10035)	Bottle with cleaning liquid	1
2	452176	Cotton Stick for Infra-Red Lens	20
3	190003	Needle for Air Bores	1

D. Pressure gauge with couplings

E. Kit - Visatron Function Test - VN115/116/215 – VN87-EMC/87Plus/87Plus-EX/93

F. MAINTENANCE PLAN – VN/87 & VN/87 EMC

Procedure/Interval:	What to do:
Procedure 1 / Every month	Check the negative pressure with u- tube manometer. Adjust if necessary! Setting level is 60,00 mmH2O! Replace the sintered bronze air filter/ fresh air filter (part no. 10042) in the measuring head. Clean the fresh air bores in the measuring head. Use the cleaning needle (part no. 10135) Clean both infra-red sensor glasses in the measuring head with cotton pins and technical alcohol.
Procedure 2 / Every 4 months	Replace sintered bronze filter and o- ring in the pressure regulator
Procedure 3 / Yearly	Replace maintenance kit for base plate (100150, 100151 or 100152). Clean the inside/ outside of base plate. Check performance of pressure regulator- replace parts if necessary! Clean suction pipes/ pipe system and siphon blocks with compressed air!
Procedure 4 / Every 4 years	Replace measuring head. Use our Exchange Pool Service (ExP) for this procedure! NOTE: When ordering an exchange unit – always inform us about engine type! Replace maintenance kit for base plate (100150, 100151 or 100152). Clean the inside/ outside of base plate. Check performance of pressure regulator- replace parts if necessary! Clean suction pipes/pipe system and siphon blocks with compressed air! Check sampling funnels/pipe system. If your system have siphon blocks: Replace rubber inserts and o-rings in siphon blocks (Part no.: 10095/360106 & 365287. *If you are ordering a complete exchange oil mist detector unit, there is no need to replace maintenance kit for base plate.*

G. MAINTENANCE PLAN – VN/87PLUS

Procedure/Interval:	What to do:
Procedure 1 / Every month	Check the negative pressure with u- tube manometer. Adjust if necessary! Setting level is 60,00 mmH2O! Replace the sintered bronze air filter/ fresh air filter (part no. 10042) in the measuring head. Clean the fresh air bores in the measuring head. Use the cleaning needle (part no. 10135) Clean both infra-red sensor glasses in the measuring head with cotton pins and technical alcohol.
Procedure 2 / Every 4 months	Replace sintered bronze filter and o- ring in the pressure regulator
Procedure 3 / Yearly	Replace maintenance kit for base plate (100150, 100151 or 100152). Clean the inside/ outside of base plate. Check performance of pressure regulator- replace parts if necessary! Clean suction pipes/ pipe system and siphon blocks with compressed air!
Procedure 4 / Every 4 years	Replace measuring head. Use our Exchange Pool Service (ExP) for this procedure! NOTE: When ordering an exchange unit – always inform us about engine type! Replace maintenance kit for base plate (100150, 100151 or 100152). Clean the inside/ outside of base plate. Check performance of pressure regulator- replace parts if necessary! Clean suction pipes/pipe system and siphon blocks with compressed air! Check sampling funnels/pipe system. If your system have siphon blocks: Replace rubber inserts and o-rings in siphon blocks (Part no.: 10095/360106 & 365287). *If you are ordering a complete exchange oil mist detector unit, there is no need to replace maintenance kit for base plate.*